Atualização

[dnielc]

Gostaria de saber se eu poderia instalar uma versão mais antiga e atualizar para a versão atual da distro?

[SuporteTecnicoID]

Gostaria de saber se eu poderia instalar uma versão mais antiga e atualizar para a versão atual da distro?

Assim como varias outras distros, remasterizadas, o KDuXP "ainda não tem este recurso" apesar de ser facil implementar um live-update nele, como faziamos no ResuLinux......e no kurumin......

Mas isto estara sendo um dos projetos no KDuXP......obrigado por sua dica do que seria melhor para voce....conto sempre com isto......e estou anotando.

[jstefferson]

Olá!!

O meu problema é o seguinte: Instalei o KDUXP em casa, maravilha, roda beleza. Porém, todavia, no entanto (rsrsrsrs), instalei no meu trabalho também: problema: no serviço tenho duas internetes, ADSL e WIFI, as duas administradas pela CELEPAR, a ADSL nem adianta querer abrir para atualizações e novas instalações on line, a WIFI aceita, mas, não consigo configurar, as instruções que recebo da CELEPAR é para o DEBIAN Lenny (se não me engano) muito antigo, inclusive a CELEPAR tem uma distribuição própria que é baseado no DEBIAN bruto. na hora de configurar eles pedem: WPA2 empresarial; PEAP protegido; usuario e senha; e pede o AES também, mas nessas novas versões não tem onde escolher esse AES; se alguem puder dar uma olhada no TUTORIAL deles e ver o que estou fazendo de errado eu agradeço muito, a página é www.fecea.br lá tem o link para internet sem fio e dentro tem o tutorial para linux.

Desde já agradeço.

P.S. só conseguindo configurar o wifi é que conseguirei manter meu sistema atualizado e poderei convencer eles a usarem o KDUXP em todas as máquinas, são mais de 300.

abraços

[SuporteTecnicoID]

Olá!!

O meu problema é o seguinte: Instalei o KDUXP em casa, maravilha, roda beleza. Porém, todavia, no entanto (rsrsrsrs), instalei no meu trabalho também: problema: no serviço tenho duas internetes, ADSL e WIFI, as duas administradas pela CELEPAR, a ADSL nem adianta querer abrir para atualizações e novas instalações on line, a WIFI aceita, mas, não consigo configurar, as instruções que recebo da CELEPAR é para o DEBIAN Lenny (se não me engano) muito antigo, inclusive a CELEPAR tem uma distribuição própria que é baseado no DEBIAN bruto. na hora de configurar eles pedem: WPA2 empresarial; PEAP protegido; usuario e senha; e pede o AES também, mas nessas novas versões não tem onde escolher esse AES; se alguem puder dar uma olhada no TUTORIAL deles e ver o que estou fazendo de errado eu agradeço muito, a página é http://www.fecea.br lá tem o link para internet sem fio e dentro tem o tutorial para linux.

Desde já agradeço.

P.S. só conseguindo configurar o wifi é que conseguirei manter meu sistema atualizado e poderei convencer eles a usarem o KDUXP em todas as máquinas, são mais de 300.

abraços

Um dos meus maiores problemas é não ter o Hardware proprio para a necessidade de cada um, tentarei verificar se falta alguma coisa que eu possa ja incluir para ajudar a solucionar, no entanto é mais tentativa e erro , como já disse aqui varias vezes , se a configuração do hardware é meia especifica, não sera fácil eu deixar ela funcionando sem o hardware....mas vamos tentar, vou ler assim que possível tento achar uma solução e se achada posto por aqui ou chamo você no msn, ja me deixe cadastrado ai....para irmos conversando e quando eu puder veremos juntos ai postamos aqui a solução......

Por enquanto, agradeço imensamente a sua intenção de apreciar o KDuXP......

[Roderickol]

Estou com o mesmo problema do amigo de cima o Jeferson, inclusive na mesma faculdade, o cara que administra a wifi lá disse que só baixando a distribuição da CELEPAR chamada de Desktop Paraná.
Queria achar uma solução para conectar. Já tentei de todas as formas que conheço, mas sem sucesso.

O link das configurações ficam aqui:
http://www.fecea.br/feceawifi/

[SuporteTecnicoID]

Estou com o mesmo problema do amigo de cima o Jeferson, inclusive na mesma faculdade, o cara que administra a wifi lá disse que só baixando a distribuição da CELEPAR chamada de Desktop Paraná.
Queria achar uma solução para conectar. Já tentei de todas as formas que conheço, mas sem sucesso.

Postem as telas dela conectando numa maquina que funcione e depois as telas tentando usar o KDuXP, para poder comparar, postem tb seus lspci, lsusb, dmesg da maquina que funciona e da maquina que esta tentando usar o KDuXP para tb compararmos.....

[Roderickol]

OFF: Estive com problemas hj para logar no forum, ficava uma tela branca e não logava.


Bom, primeiramente obrigado pela atenção.
Não tenho uma maquina que funcione com a conexão lá, só em Windows. E tbm não uso KDuXP, mas uso Ubuntu, que é base para o KDuXP, imagino que o gerenciador é o NetworkManager como no Ubuntu.

Então posso postar mais tarde a tela dele com minhas configurações, que depois que eu peço para ele conectar fica tentando e não conecta, volta para a tela de configuração. Assim como o lspci, lsusb, dmesg.

Posso baixar o Desktop Paraná e usa-lo como liveCD e tentar conectar lá, e assim poder te passar as informações que pediu.

Mais tarde te deixo a par do que acontece,

Att
Rodrigo


______________________________________________________________

EDIT

Tentei rodar o Desktop paraná sem exito. Dava que o SO não era encontrado.

Mas enfim, tentei conectar e tirei uma imagem de como está minha configuração no Ubuntu.
http://lh6.ggpht.com/_p5BWc4S9QVM/THR9f ... tela-1.png

lspci

00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07)
00:01.0 PCI bridge: Intel Corporation Mobile 4 Series Chipset PCI Express Graphics Port (rev 07)
00:1a.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 03)
00:1a.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 03)
00:1a.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 03)
00:1a.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 03)
00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03)
00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 03)
00:1c.1 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 (rev 03)
00:1c.2 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 3 (rev 03)
00:1c.3 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 4 (rev 03)
00:1d.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 03)
00:1d.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 03)
00:1d.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 03)
00:1d.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 03)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 93)
00:1f.0 ISA bridge: Intel Corporation ICH9M LPC Interface Controller (rev 03)
00:1f.2 SATA controller: Intel Corporation ICH9M/M-E SATA AHCI Controller (rev 03)
00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 03)
01:00.0 VGA compatible controller: nVidia Corporation GT218 [GeForce G210M] (rev a2)
01:00.1 Audio device: nVidia Corporation High Definition Audio Controller (rev a1)
02:00.0 Ethernet controller: Marvell Technology Group Ltd. Device 4380 (rev 10)
03:00.0 Network controller: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) (rev 01)
04:00.0 SD Host controller: Ricoh Co Ltd Device e822
04:00.1 System peripheral: Ricoh Co Ltd Device e230
04:00.3 FireWire (IEEE 1394): Ricoh Co Ltd Device e832
04:00.4 SD Host controller: Ricoh Co Ltd Device e822

lsusb

roderickol@ubuntu:~$ lsusb
Bus 008 Device 002: ID 044e:3017 Alps Electric Co., Ltd
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 003: ID 04e8:1f06 Samsung Electronics Co., Ltd
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 05ca:18b5 Ricoh Co., Ltd
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

dmesg

[ 226.872032] wlan0: no IPv6 routers present
[ 1080.032556] wlan0: deauthenticating from 00:26:5a:2f:4e:04 by local choice (reason=3)
[ 1080.121798] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 1088.553513] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 1125.061345] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 1125.120557] sky2 eth0: disabling interface
[ 1125.129401] sky2 eth0: enabling interface
[ 1125.129820] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 1125.273912] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 1127.351827] wlan0: direct probe to AP 00:26:5a:2f:4e:04 (try 1)
[ 1127.353755] wlan0: direct probe responded
[ 1127.353762] wlan0: authenticate with AP 00:26:5a:2f:4e:04 (try 1)
[ 1127.355432] wlan0: authenticated
[ 1127.355460] wlan0: associate with AP 00:26:5a:2f:4e:04 (try 1)
[ 1127.358457] wlan0: RX AssocResp from 00:26:5a:2f:4e:04 (capab=0x431 status=0 aid=1)
[ 1127.358463] wlan0: associated
[ 1127.358936] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 1127.372052] wlan0: deauthenticating from 00:26:5a:2f:4e:04 by local choice (reason=3)
[ 1127.481361] wlan0: direct probe to AP 00:26:5a:2f:4e:04 (try 1)
[ 1127.482746] wlan0: direct probe responded
[ 1127.482751] wlan0: authenticate with AP 00:26:5a:2f:4e:04 (try 1)
[ 1127.484331] wlan0: authenticated
[ 1127.484352] wlan0: associate with AP 00:26:5a:2f:4e:04 (try 1)
[ 1127.486293] wlan0: RX AssocResp from 00:26:5a:2f:4e:04 (capab=0x431 status=0 aid=1)
[ 1127.486297] wlan0: associated
[ 1128.391782] type=1503 audit(1282702078.249:18): operation="open" pid=3934 parent=3907 profile="/sbin/dhclient3" requested_mask="r::" denied_mask="r::" fsuid=0 ouid=0 name="/var/lib/wicd/dhclient.conf"
[ 1138.124076] wlan0: no IPv6 routers present
[ 1144.928043] CE: hpet increasing min_delta_ns to 15000 nsec
[ 1197.170940] CPU0 attaching NULL sched-domain.
[ 1197.170945] CPU1 attaching NULL sched-domain.
[ 1197.192661] CPU0 attaching sched-domain:
[ 1197.192666] domain 0: span 0-1 level MC
[ 1197.192670] groups: 0 1
[ 1197.192678] CPU1 attaching sched-domain:
[ 1197.192681] domain 0: span 0-1 level MC
[ 1197.192685] groups: 1 0
[ 1197.908061] wlan0: deauthenticating from 00:26:5a:2f:4e:04 by local choice (reason=3)
[ 1197.997274] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 1198.068128] sky2 eth0: disabling interface
[ 1198.076780] sky2 eth0: enabling interface
[ 1198.077194] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 1198.153328] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 1198.261869] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 1198.320268] sky2 eth0: disabling interface
[ 1198.329529] sky2 eth0: enabling interface
[ 1198.329933] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 1200.280766] PM: Syncing filesystems ... done.
[ 1200.396584] PM: Preparing system for mem sleep
[ 1200.396588] Freezing user space processes ... (elapsed 0.00 seconds) done.
[ 1200.397325] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
[ 1200.397372] PM: Entering mem sleep
[ 1200.397384] Suspending console(s) (use no_console_suspend to debug)
[ 1200.462390] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 1200.608269] sd 0:0:0:0: [sda] Stopping disk
[ 1201.194326] PM: suspend of drv:sd dev:0:0:0:0 complete after 731.933 msecs
[ 1201.196223] btusb_intr_complete: hci0 urb dac53980 failed to resubmit (1)
[ 1201.197220] btusb_bulk_complete: hci0 urb dac53a80 failed to resubmit (1)
[ 1201.198221] btusb_bulk_complete: hci0 urb dac53a00 failed to resubmit (1)
[ 1201.619298] PM: suspend of drv:psmouse dev:serio2 complete after 391.177 msecs
[ 1201.724075] PM: suspend of drv:atkbd dev:serio0 complete after 104.724 msecs
[ 1201.726460] ACPI handle has no context!
[ 1201.727609] ACPI handle has no context!
[ 1201.727617] sdhci-pci 0000:04:00.4: PCI INT C disabled
[ 1201.727630] ACPI handle has no context!
[ 1201.745258] ACPI handle has no context!
[ 1201.761185] sdhci-pci 0000:04:00.0: PCI INT A disabled
[ 1201.776221] ath9k 0000:03:00.0: PCI INT A disabled
[ 1201.792098] sky2 eth0: disabling interface
[ 1202.256113] HDA Intel 0000:01:00.1: PCI INT A disabled
[ 1202.256216] ACPI handle has no context!
[ 1202.272080] PM: suspend of drv:HDA Intel dev:0000:01:00.1 complete after 463.985 msecs
[ 1202.423357] PM: suspend of drv:nvidia dev:0000:01:00.0 complete after 151.273 msecs
[ 1202.468098] ehci_hcd 0000:00:1d.7: PCI INT A disabled
[ 1202.468108] uhci_hcd 0000:00:1d.2: PCI INT C disabled
[ 1202.468118] uhci_hcd 0000:00:1d.1: PCI INT B disabled
[ 1202.468127] uhci_hcd 0000:00:1d.0: PCI INT A disabled
[ 1202.573382] HDA Intel 0000:00:1b.0: PCI INT A disabled
[ 1202.588073] PM: suspend of drv:HDA Intel dev:0000:00:1b.0 complete after 119.924 msecs
[ 1202.588082] ehci_hcd 0000:00:1a.7: PCI INT C disabled
[ 1202.588092] uhci_hcd 0000:00:1a.2: PCI INT C disabled
[ 1202.588101] uhci_hcd 0000:00:1a.1: PCI INT B disabled
[ 1202.588110] uhci_hcd 0000:00:1a.0: PCI INT A disabled
[ 1202.588385] PM: suspend of devices complete after 2190.680 msecs
[ 1202.588387] PM: suspend devices took 2.192 seconds
[ 1202.620232] PM: late suspend of devices complete after 31.840 msecs
[ 1202.620495] ACPI: Preparing to enter system sleep state S3
[ 1202.636011] Disabling non-boot CPUs ...
[ 1202.636029] CPU0 attaching NULL sched-domain.
[ 1202.636032] CPU1 attaching NULL sched-domain.
[ 1202.700014] CPU0 attaching NULL sched-domain.
[ 1202.701129] Breaking affinity for irq 9
[ 1202.701151] Breaking affinity for irq 17
[ 1202.701155] Breaking affinity for irq 18
[ 1202.701164] Breaking affinity for irq 22
[ 1202.701168] Breaking affinity for irq 23
[ 1202.804019] CPU 1 is now offline
[ 1202.804021] SMP alternatives: switching to UP code
[ 1202.810070] Extended CMOS year: 2000
[ 1202.810070] Back to C!
[ 1202.810070] CPU0: Thermal monitoring enabled (TM2)
[ 1202.810070] Extended CMOS year: 2000
[ 1202.810070] Enabling non-boot CPUs ...
[ 1202.810070] SMP alternatives: switching to SMP code
[ 1202.815768] Booting processor 1 APIC 0x1 ip 0x6000
[ 1202.809725] Initializing CPU#1
[ 1202.809725] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 1202.809725] CPU: L2 cache: 2048K
[ 1202.809725] CPU: Physical Processor ID: 0
[ 1202.809725] CPU: Processor Core ID: 1
[ 1202.809725] CPU1: Thermal monitoring enabled (TM2)
[ 1202.904032] CPU1: Intel(R) Core(TM)2 Duo CPU T6600 @ 2.20GHz stepping 0a
[ 1202.904085] CPU0 attaching NULL sched-domain.
[ 1202.932015] CPU0 attaching sched-domain:
[ 1202.932018] domain 0: span 0-1 level MC
[ 1202.932020] groups: 0 1
[ 1202.932023] CPU1 attaching sched-domain:
[ 1202.932025] domain 0: span 0-1 level MC
[ 1202.932027] groups: 1 0
[ 1202.932425] CPU1 is up
[ 1202.932898] ACPI: Waking up from system sleep state S3
[ 1203.140458] pcieport 0000:00:01.0: restoring config space at offset 0xf (was 0x80100, writing 0x8010b)
[ 1203.140464] pcieport 0000:00:01.0: restoring config space at offset 0xa (was 0xf, writing 0x0)
[ 1203.140468] pcieport 0000:00:01.0: restoring config space at offset 0x9 (was 0x1fff1, writing 0xd8f1d8e1)
[ 1203.140471] pcieport 0000:00:01.0: restoring config space at offset 0x8 (was 0xfff0, writing 0xd300c000)
[ 1203.140475] pcieport 0000:00:01.0: restoring config space at offset 0x7 (was 0x200000f0, writing 0xd0d0)
[ 1203.140480] pcieport 0000:00:01.0: restoring config space at offset 0x3 (was 0x10000, writing 0x10010)
[ 1203.140484] pcieport 0000:00:01.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100407)
[ 1203.140515] uhci_hcd 0000:00:1a.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
[ 1203.140529] uhci_hcd 0000:00:1a.0: restoring config space at offset 0x8 (was 0x1, writing 0xe0e1)
[ 1203.140543] uhci_hcd 0000:00:1a.0: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900001)
[ 1203.140565] uhci_hcd 0000:00:1a.1: restoring config space at offset 0xf (was 0x200, writing 0x20a)
[ 1203.140579] uhci_hcd 0000:00:1a.1: restoring config space at offset 0x8 (was 0x1, writing 0xe0c1)
[ 1203.140593] uhci_hcd 0000:00:1a.1: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900001)
[ 1203.140614] uhci_hcd 0000:00:1a.2: restoring config space at offset 0xf (was 0x300, writing 0x305)
[ 1203.140628] uhci_hcd 0000:00:1a.2: restoring config space at offset 0x8 (was 0x1, writing 0xe0a1)
[ 1203.140642] uhci_hcd 0000:00:1a.2: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900001)
[ 1203.140672] ehci_hcd 0000:00:1a.7: restoring config space at offset 0xf (was 0x300, writing 0x305)
[ 1203.140692] ehci_hcd 0000:00:1a.7: restoring config space at offset 0x4 (was 0x0, writing 0xd8d04c00)
[ 1203.140700] ehci_hcd 0000:00:1a.7: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900002)
[ 1203.140737] HDA Intel 0000:00:1b.0: restoring config space at offset 0xf (was 0x100, writing 0x103)
[ 1203.140757] HDA Intel 0000:00:1b.0: restoring config space at offset 0x4 (was 0xc0000004, writing 0xd8d00004)
[ 1203.140762] HDA Intel 0000:00:1b.0: restoring config space at offset 0x3 (was 0x0, writing 0x10)
[ 1203.140768] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100002)
[ 1203.140803] pcieport 0000:00:1c.0: restoring config space at offset 0xf (was 0x100, writing 0x104)
[ 1203.140815] pcieport 0000:00:1c.0: restoring config space at offset 0x9 (was 0x1fff1, writing 0xd911d901)
[ 1203.140827] pcieport 0000:00:1c.0: restoring config space at offset 0x3 (was 0x810000, writing 0x810010)
[ 1203.140834] pcieport 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100407)
[ 1203.140884] pcieport 0000:00:1c.1: restoring config space at offset 0xf (was 0x200, writing 0x20b)
[ 1203.140896] pcieport 0000:00:1c.1: restoring config space at offset 0x9 (was 0x1fff1, writing 0xd931d921)
[ 1203.140909] pcieport 0000:00:1c.1: restoring config space at offset 0x3 (was 0x810000, writing 0x810010)
[ 1203.140915] pcieport 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100000, writing 0x100407)
[ 1203.140966] pcieport 0000:00:1c.2: restoring config space at offset 0xf (was 0x300, writing 0x30b)
[ 1203.140978] pcieport 0000:00:1c.2: restoring config space at offset 0x9 (was 0x1fff1, writing 0xd951d941)
[ 1203.140991] pcieport 0000:00:1c.2: restoring config space at offset 0x3 (was 0x810000, writing 0x810010)
[ 1203.140997] pcieport 0000:00:1c.2: restoring config space at offset 0x1 (was 0x100000, writing 0x100407)
[ 1203.141047] pcieport 0000:00:1c.3: restoring config space at offset 0xf (was 0x400, writing 0x405)
[ 1203.141060] pcieport 0000:00:1c.3: restoring config space at offset 0x9 (was 0x1fff1, writing 0xd971d961)
[ 1203.141072] pcieport 0000:00:1c.3: restoring config space at offset 0x3 (was 0x810000, writing 0x810010)
[ 1203.141079] pcieport 0000:00:1c.3: restoring config space at offset 0x1 (was 0x100000, writing 0x100407)
[ 1203.141123] uhci_hcd 0000:00:1d.0: restoring config space at offset 0xf (was 0x100, writing 0x10a)
[ 1203.141137] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x8 (was 0x1, writing 0xe081)
[ 1203.141151] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900001)
[ 1203.141173] uhci_hcd 0000:00:1d.1: restoring config space at offset 0xf (was 0x200, writing 0x205)
[ 1203.141187] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x8 (was 0x1, writing 0xe061)
[ 1203.141201] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900001)
[ 1203.141222] uhci_hcd 0000:00:1d.2: restoring config space at offset 0xf (was 0x300, writing 0x30b)
[ 1203.141236] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x8 (was 0x1, writing 0xe041)
[ 1203.141250] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900001)
[ 1203.141279] ehci_hcd 0000:00:1d.7: restoring config space at offset 0xf (was 0x100, writing 0x10a)
[ 1203.141298] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x4 (was 0x0, writing 0xd8d04800)
[ 1203.141306] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900002)
[ 1203.141355] pci 0000:00:1e.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100007)
[ 1203.141456] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00007, writing 0x2b00407)
[ 1203.141568] nvidia 0000:01:00.0: restoring config space at offset 0xc (was 0xd3000000, writing 0x0)
[ 1203.141646] HDA Intel 0000:01:00.1: restoring config space at offset 0xf (was 0x100, writing 0x10b)
[ 1203.141665] HDA Intel 0000:01:00.1: restoring config space at offset 0x4 (was 0x0, writing 0xd3080000)
[ 1203.141671] HDA Intel 0000:01:00.1: restoring config space at offset 0x3 (was 0x800000, writing 0x800010)
[ 1203.141677] HDA Intel 0000:01:00.1: restoring config space at offset 0x1 (was 0x100000, writing 0x100002)
[ 1203.141960] sky2 0000:02:00.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
[ 1203.142013] sky2 0000:02:00.0: restoring config space at offset 0xc (was 0x0, writing 0xd7900000)
[ 1203.142114] sky2 0000:02:00.0: restoring config space at offset 0x6 (was 0x1, writing 0xc001)
[ 1203.142165] sky2 0000:02:00.0: restoring config space at offset 0x4 (was 0x4, writing 0xd7920004)
[ 1203.142193] sky2 0000:02:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10)
[ 1203.142242] sky2 0000:02:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100407)
[ 1203.142541] ath9k 0000:03:00.0: restoring config space at offset 0xf (was 0x1ff, writing 0x104)
[ 1203.142568] ath9k 0000:03:00.0: restoring config space at offset 0x4 (was 0x4, writing 0xd6500004)
[ 1203.142574] ath9k 0000:03:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10)
[ 1203.142583] ath9k 0000:03:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100007)
[ 1203.142667] sdhci-pci 0000:04:00.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
[ 1203.142697] sdhci-pci 0000:04:00.0: restoring config space at offset 0x4 (was 0x0, writing 0xd5100a00)
[ 1203.142703] sdhci-pci 0000:04:00.0: restoring config space at offset 0x3 (was 0x800000, writing 0x800010)
[ 1203.142712] sdhci-pci 0000:04:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100006)
[ 1203.142767] pci 0000:04:00.1: restoring config space at offset 0xf (was 0x200, writing 0x205)
[ 1203.142796] pci 0000:04:00.1: restoring config space at offset 0x4 (was 0x0, writing 0xd5100900)
[ 1203.142803] pci 0000:04:00.1: restoring config space at offset 0x3 (was 0x800000, writing 0x800010)
[ 1203.142812] pci 0000:04:00.1: restoring config space at offset 0x1 (was 0x100000, writing 0x100006)
[ 1203.142866] ohci1394 0000:04:00.3: restoring config space at offset 0xf (was 0x400, writing 0x404)
[ 1203.142895] ohci1394 0000:04:00.3: restoring config space at offset 0x4 (was 0x0, writing 0xd5100000)
[ 1203.142902] ohci1394 0000:04:00.3: restoring config space at offset 0x3 (was 0x800000, writing 0x800010)
[ 1203.142911] ohci1394 0000:04:00.3: restoring config space at offset 0x1 (was 0x100000, writing 0x100006)
[ 1203.142966] sdhci-pci 0000:04:00.4: restoring config space at offset 0xf (was 0x300, writing 0x30b)
[ 1203.142994] sdhci-pci 0000:04:00.4: restoring config space at offset 0x4 (was 0x0, writing 0xd5100800)
[ 1203.143001] sdhci-pci 0000:04:00.4: restoring config space at offset 0x3 (was 0x800000, writing 0x800010)
[ 1203.143010] sdhci-pci 0000:04:00.4: restoring config space at offset 0x1 (was 0x100000, writing 0x100006)
[ 1203.143428] PM: early resume of devices complete after 3.109 msecs
[ 1203.219941] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1203.219948] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 1203.219972] usb usb3: root hub lost power or was reset
[ 1203.219993] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 1203.220000] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 1203.220042] usb usb4: root hub lost power or was reset
[ 1203.220064] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 19 (level, low) -> IRQ 19
[ 1203.220070] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[ 1203.220094] usb usb5: root hub lost power or was reset
[ 1203.220114] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 19 (level, low) -> IRQ 19
[ 1203.220120] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 1203.220133] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 1203.220139] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 1203.220177] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1203.220183] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1203.220206] usb usb6: root hub lost power or was reset
[ 1203.220227] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1203.220233] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 1203.220257] usb usb7: root hub lost power or was reset
[ 1203.220278] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1203.220284] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 1203.220306] usb usb8: root hub lost power or was reset
[ 1203.220337] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1203.220344] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 1203.220358] pci 0000:00:1e.0: setting latency timer to 64
[ 1203.220373] ahci 0000:00:1f.2: setting latency timer to 64
[ 1203.548594] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1203.552745] ata2.00: configured for UDMA/100
[ 1203.643019] PM: resume of drv:nvidia dev:0000:01:00.0 complete after 422.570 msecs
[ 1203.643590] HDA Intel 0000:01:00.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1203.643600] HDA Intel 0000:01:00.1: setting latency timer to 64
[ 1203.646950] sky2 eth0: enabling interface
[ 1203.646994] ath9k 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 1203.647045] sdhci-pci 0000:04:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1203.647048] sdhci-pci 0000:04:00.0: Will use DMA mode even though HW doesn't fully claim to support it.
[ 1203.647055] sdhci-pci 0000:04:00.0: setting latency timer to 64
[ 1203.707093] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[17] MMIO=[d5100000-d51007ff] Max Packet=[2048] IR/IT contexts=[4/4]
[ 1203.715155] sdhci-pci 0000:04:00.4: PCI INT C -> GSI 16 (level, low) -> IRQ 16
[ 1203.715158] sdhci-pci 0000:04:00.4: Will use DMA mode even though HW doesn't fully claim to support it.
[ 1203.715164] sdhci-pci 0000:04:00.4: setting latency timer to 64
[ 1204.044060] PM: resume of drv:usb dev:usb8 complete after 247.897 msecs
[ 1204.208063] usb 8-1: reset full speed USB device using uhci_hcd and address 2
[ 1204.359142] btusb 8-1:1.0: no reset_resume for driver btusb?
[ 1204.359144] btusb 8-1:1.1: no reset_resume for driver btusb?
[ 1204.548065] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1204.548956] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[ 1204.548959] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[ 1204.548962] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[ 1204.549901] ACPI Error: Field [CMDX] at 224 exceeds Buffer [SCBF] size 168 (bits) (20090903/dsopcode-596)
[ 1204.549907] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.SATA.GTFB] (Node f703e498), AE_AML_BUFFER_LIMIT
[ 1204.549932] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.SATA.SPT0._SDD] (Node f703e3d8), AE_AML_BUFFER_LIMIT
[ 1204.549959] ata1.00: ACPI _SDD failed (AE 0x300a)
[ 1204.549961] ata1.00: revalidation failed (errno=-5)
[ 1204.608687] PM: resume of drv:usb dev:8-1 complete after 512.076 msecs
[ 1204.608723] sd 0:0:0:0: [sda] Starting disk
[ 1209.868060] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1209.868729] ACPI Error: Field [CMDX] at 224 exceeds Buffer [SCBF] size 168 (bits) (20090903/dsopcode-596)
[ 1209.868735] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.SATA.GTFB] (Node f703e498), AE_AML_BUFFER_LIMIT
[ 1209.868759] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.SATA.SPT0._SDD] (Node f703e3d8), AE_AML_BUFFER_LIMIT
[ 1209.868786] ata1.00: ACPI _SDD failed (AE 0x300a)
[ 1209.868788] ata1.00: ACPI: failed the second time, disabled
[ 1209.921090] ata1.00: configured for UDMA/100
[ 1209.985081] PM: resume of drv:sd dev:0:0:0:0 complete after 5376.356 msecs
[ 1210.068225] PM: resume of devices complete after 6924.752 msecs
[ 1210.068529] PM: resume devices took 6.928 seconds
[ 1210.068565] PM: Finishing wakeup.
[ 1210.068566] Restarting tasks ... done.
[ 1212.768762] CPU0 attaching NULL sched-domain.
[ 1212.768767] CPU1 attaching NULL sched-domain.
[ 1212.804736] CPU0 attaching sched-domain:
[ 1212.804740] domain 0: span 0-1 level MC
[ 1212.804742] groups: 0 1
[ 1212.804746] domain 1: span 0-1 level CPU
[ 1212.804749] groups: 0-1 (cpu_power = 2048)
[ 1212.804754] CPU1 attaching sched-domain:
[ 1212.804756] domain 0: span 0-1 level MC
[ 1212.804758] groups: 1 0
[ 1212.804761] domain 1: span 0-1 level CPU
[ 1212.804763] groups: 0-1 (cpu_power = 2048)
[ 1213.784449] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 1213.868137] sky2 eth0: disabling interface
[ 1213.884771] sky2 eth0: enabling interface
[ 1213.892113] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 1214.080600] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 1216.146564] wlan0: direct probe to AP 00:26:5a:2f:4e:04 (try 1)
[ 1216.147966] wlan0: direct probe responded
[ 1216.147972] wlan0: authenticate with AP 00:26:5a:2f:4e:04 (try 1)
[ 1216.149599] wlan0: authenticated
[ 1216.149627] wlan0: associate with AP 00:26:5a:2f:4e:04 (try 1)
[ 1216.151689] wlan0: RX AssocResp from 00:26:5a:2f:4e:04 (capab=0x431 status=0 aid=1)
[ 1216.151695] wlan0: associated
[ 1216.152186] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 1216.172651] wlan0: deauthenticating from 00:26:5a:2f:4e:04 by local choice (reason=3)
[ 1217.274599] wlan0: direct probe to AP 00:26:5a:2f:4e:04 (try 1)
[ 1217.275983] wlan0: direct probe responded
[ 1217.275988] wlan0: authenticate with AP 00:26:5a:2f:4e:04 (try 1)
[ 1217.277559] wlan0: authenticated
[ 1217.277587] wlan0: associate with AP 00:26:5a:2f:4e:04 (try 1)
[ 1217.280358] wlan0: RX AssocResp from 00:26:5a:2f:4e:04 (capab=0x431 status=0 aid=1)
[ 1217.280364] wlan0: associated
[ 1218.199150] type=1503 audit(1282702170.624:19): operation="open" pid=4712 parent=4680 profile="/sbin/dhclient3" requested_mask="r::" denied_mask="r::" fsuid=0 ouid=0 name="/var/lib/wicd/dhclient.conf"
[ 1224.376059] wlan0: deauthenticating from 00:26:5a:2f:4e:04 by local choice (reason=3)
[ 1224.427636] ------------[ cut here ]------------
[ 1224.427660] WARNING: at /build/buildd/linux-2.6.32/net/wireless/core.c:614 wdev_cleanup_work+0xa7/0xd0 [cfg80211]()
[ 1224.427665] Hardware name: VPCCW17FX
[ 1224.427667] Modules linked in: usb_storage rfcomm binfmt_misc sco ppdev bridge stp bnep l2cap joydev snd_hda_codec_realtek btusb snd_hda_intel snd_hda_codec snd_hwdep snd_pcm_oss bluetooth snd_mixer_oss snd_pcm snd_seq_dummy snd_seq_oss snd_seq_midi snd_rawmidi snd_seq_midi_event snd_seq snd_timer snd_seq_device snd uvcvideo videodev v4l1_compat arc4 ath9k mac80211 ath cfg80211 nvidia(P) soundcore snd_page_alloc sdhci_pci sdhci led_class psmouse serio_raw sony_laptop lp parport vesafb ohci1394 video intel_agp ieee1394 output sky2 ahci agpgart
[ 1224.427740] Pid: 4440, comm: events/1 Tainted: P 2.6.32-24-generic #41-Ubuntu
[ 1224.427744] Call Trace:
[ 1224.427754] [<c014c4a2>] warn_slowpath_common+0x72/0xa0
[ 1224.427766] [<f80adea7>] ? wdev_cleanup_work+0xa7/0xd0 [cfg80211]
[ 1224.427777] [<f80adea7>] ? wdev_cleanup_work+0xa7/0xd0 [cfg80211]
[ 1224.427783] [<c014c4ea>] warn_slowpath_null+0x1a/0x20
[ 1224.427794] [<f80adea7>] wdev_cleanup_work+0xa7/0xd0 [cfg80211]
[ 1224.427801] [<c016376e>] run_workqueue+0x8e/0x150
[ 1224.427813] [<f80ade00>] ? wdev_cleanup_work+0x0/0xd0 [cfg80211]
[ 1224.427819] [<c01638b4>] worker_thread+0x84/0xe0
[ 1224.427825] [<c0167810>] ? autoremove_wake_function+0x0/0x50
[ 1224.427831] [<c0163830>] ? worker_thread+0x0/0xe0
[ 1224.427836] [<c0167584>] kthread+0x74/0x80
[ 1224.427841] [<c0167510>] ? kthread+0x0/0x80
[ 1224.427847] [<c0104087>] kernel_thread_helper+0x7/0x10
[ 1224.427851] ---[ end trace 42677bbe7b0f3279 ]---
[ 1225.682259] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 1225.789883] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 1225.864042] sky2 eth0: disabling interface
[ 1225.873146] sky2 eth0: enabling interface
[ 1225.873592] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 1227.624049] sky2 eth0: disabling interface
[ 1229.716160] sky2 eth0: enabling interface
[ 1229.716409] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 1231.761354] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 1242.257339] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 1242.324042] sky2 eth0: disabling interface
[ 1242.333165] sky2 eth0: enabling interface
[ 1242.333585] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 1242.461931] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 1244.534899] wlan0: direct probe to AP 00:26:5a:2f:4e:04 (try 1)
[ 1244.536827] wlan0: direct probe responded
[ 1244.536833] wlan0: authenticate with AP 00:26:5a:2f:4e:04 (try 1)
[ 1244.538435] wlan0: authenticated
[ 1244.538461] wlan0: associate with AP 00:26:5a:2f:4e:04 (try 1)
[ 1244.540576] wlan0: RX AssocResp from 00:26:5a:2f:4e:04 (capab=0x431 status=0 aid=1)
[ 1244.540583] wlan0: associated
[ 1244.541051] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 1244.561710] wlan0: deauthenticating from 00:26:5a:2f:4e:04 by local choice (reason=3)
[ 1244.671415] wlan0: direct probe to AP 00:26:5a:2f:4e:04 (try 1)
[ 1244.672820] wlan0: direct probe responded
[ 1244.672826] wlan0: authenticate with AP 00:26:5a:2f:4e:04 (try 1)
[ 1244.674357] wlan0: authenticated
[ 1244.674378] wlan0: associate with AP 00:26:5a:2f:4e:04 (try 1)
[ 1244.676386] wlan0: RX AssocResp from 00:26:5a:2f:4e:04 (capab=0x431 status=0 aid=1)
[ 1244.676391] wlan0: associated
[ 1245.582229] type=1503 audit(1282702198.008:20): operation="open" pid=4829 parent=4802 profile="/sbin/dhclient3" requested_mask="r::" denied_mask="r::" fsuid=0 ouid=0 name="/var/lib/wicd/dhclient.conf"
[ 1254.592089] wlan0: no IPv6 routers present
[ 1334.524058] wlan0: deauthenticating from 00:26:5a:2f:4e:04 by local choice (reason=3)
[ 1334.605913] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 1334.680573] sky2 eth0: disabling interface
[ 1334.689990] sky2 eth0: enabling interface
[ 1334.690456] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 1341.422292] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 1342.430942] wlan0: direct probe to AP 00:26:5a:2f:4e:04 (try 1)
[ 1342.430962] wlan0: deauthenticating from 00:26:5a:2f:4e:04 by local choice (reason=3)
[ 1342.431051] wlan0: direct probe to AP 00:26:5a:2f:4e:04 (try 1)
[ 1342.434104] wlan0: direct probe responded
[ 1342.434109] wlan0: authenticate with AP 00:26:5a:2f:4e:04 (try 1)
[ 1342.436113] wlan0: authenticated
[ 1342.436142] wlan0: associate with AP 00:26:5a:2f:4e:04 (try 1)
[ 1342.438178] wlan0: RX AssocResp from 00:26:5a:2f:4e:04 (capab=0x431 status=0 aid=1)
[ 1342.438181] wlan0: associated
[ 1342.438487] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 1352.728072] wlan0: no IPv6 routers present
roderickol@ubuntu:~$

Vou tentar rodar o Desktop Paraná de novo pra ver se consigo obter o resto das informações.

[Roderickol]

Fui tentar usar o Desktop Paraná, e ele não tem LiveCD, e por ser muito confuso acabei apagando o Windows de uma maquina que eu tenho em casa.

[SuporteTecnicoID]

Hoje o KDu, esta bem melhor e mais fácil ainda.....